Upgrade your kayak experience with the Lifetime Kayak Seat Riser from Zephyrs Market. Designed to fit the Lifetime Tamarack Pro, Kenai Pro and Teton Angler kayaks, it adds 3in of extra lift in the rear and 1.4in in the front, providing more spacious storage for your angling gear. Make the most of your time on the water with increased comfort and convenience.
-
Remove the seat.
- Locate the two screws that secure the seat to the kayak.
- Remove the screws and set the seat aside.
-
Remove the old seat retainer.
- Locate the two screws that secure the old seat retainer to the kayak.
- Remove the screws and set the old seat retainer aside.
-
Install the front seat riser spacers.
- Place the front seat riser spacers onto the front seat retainer.
- Secure the front seat riser spacers in place using the longer screws provided with your kit.
-
Install the rear risers.
- Slide the rear risers onto the rear posts of the kayak.
- Align the rear risers so that they are facing downwards.
-
Replace the seat.
- Place the seat back onto the kayak.
- Secure the seat in place using the retaining clips on the front riser.
-
Adjust the rear risers.
- Adjust the rear risers so that the seat is level.
- You can attach some padding to the rear risers to cushion the seat.
Installation Video: Here
Here are some additional tips for installing the kayak seat riser:
- Make sure that the front seat riser spacers are installed correctly. If they are not installed correctly, the seat may not be level.
- Make sure that the rear risers are adjusted so that the seat is level. If the seat is not level, you may experience discomfort while kayaking.
- You can attach some padding to the rear risers to cushion the seat. This will make the seat more comfortable.
